A36 is an American standard carbon structural plate, which is subject to ASTM A36/A36M. This standard is applicable to riveting, bolting and welding structures for bridges and buildings, as well as general purpose structural steel quality carbon steel sections, plates and bars.
X42 pipeline pipe is the pipeline pipe with steel grade of X42. The pipeline pipe is used to transport the oil, steam and water pumped out of the ground to the oil and natural gas industrial enterprises through the pipeline pipe. Pipeline pipe includes seamless pipe and welded steel pipe, with flat end, threaded end and socket end at the pipe end; The connection methods are welding, coupling connection, socket connection, etc.
Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point.
S355 Carbon steel plate is a carbon steel used in buildings, bridges, ships, vehicles and other structures, which must have a certain strength and require impact performance and welding performance when necessary.
NM500 steel plate is a high-strength wear-resistant steel plate with high wear resistance.
NM500 wear-resistant steel plate is widely used in engineering machinery, environmental protection machinery, metallurgical machinery, abrasives, bearings and other product parts.
ASTM A283 is a carbon steel plate for general structural use with low to medium tensile strength. The ASTM A283 steel specification covers four structural quality grades of low carbon steel plates for general application, Grade A, B, C, and D.
1020 belongs to high-quality carbon structural steel. Its strength is slightly higher than 1015 steel. It has good toughness, plasticity and weldability. It is rarely quenched and has no temper brittleness. Parts with high cold deformation plasticity, generally used for bending, calendering, edge bending and hammer arch processing, good welding performance of electric arc welding and contact welding, small thickness during gas welding, strict shape requirements or complex shapes are prone to cracks. Machinability cold drawing or normalizing state is better than annealing state, and is often used to manufacture various mechanical parts with low stress and high toughness requirements.
Due to moderate carbon content and good comprehensive properties, the strength, plasticity, welding and other properties are well matched, which is the most widely used. SS400 steel plate is applicable to bridges, ships and vehicles.SS400 is often rolled into wire rod or round steel, square steel, flat steel, angle steel, I-beam, channel steel, window frame steel and other section steel, medium thick steel plate. It is widely used in buildings and engineering structures. It is used for making steel bars or building workshop frames, high-voltage transmission towers, bridges, vehicles, boilers, containers, ships, etc., and is also widely used as mechanical parts with low performance requirements; C. Grade D steel can also be used as some professional steel.
PPGI is galvanized color plate, PPGL is galvanized color plate, both are color plates, the substrates are different, one is galvanized structure, the other is galvanized structure, the substrate is different, which determines the difference in performance.
DC01 Galvanized steel coil is used for automobiles, sanitary ware, food machinery, pressure vessels, nuclear power, chemical equipment, elevators, rail transit, machinery manufacturing, structural piping, and architectural decoration.
S235JR is a European standard non alloy structural steel, which is equivalent to the national standard Q235B, that is, carbon structural steel with low carbon content. It is widely used for welding, bolting and riveting structures. It can also be used for building, bridge, ship, vehicle structural parts, manufacturing various tools, cutting tools, molds and measuring tools.
Structural Steel Pipe. A wide range of applications rely on structural steel pipe for strength and stability. Gnee steel supply welded and seamless pipe for structural applications to customers in all industries. As a leading steel pipe supplier, Gnee steel offers a large inventory of pipe and tubing sizes from 1/8” NPS to 48” NPS.
AH36 steel plate is a steel plate with a thickness of no more than 150 mm for the manufacture of ocean going, coastal and inland navigation ships, fishing boats and offshore engineering structures. For steel plates with Z-direction requirements, add Z25 and Z35 to the suffix, which is used as structural steel for high-strength ships and offshore engineering.
S275JR steel plate is generally used for drilling machines, shovels, electric wheel dumpers, excavators, bulldozers, various cranes, coal mine hydraulic supports and other mechanical equipment and other structural parts used in construction and various projects.
Hot rolled stainless steel light channel steel (YB164-63) Hot rolled light channel steel is a kind of steel with wide legs and thin walls, which has better economic effect than ordinary hot rolled channel steel. Main use: for building and steel structure.
SPCE is suitable for deep drawing grade steel.Cold rolled steel is our most common and commonly used cold rolled products.Its brand can be generally divided into: SPCC, SPCD, SPCE.
SPCE is suitable for deep drawing grade steel.
ST12 is German standard (DIN1623), It's ordinary cold rolled steel. In principle, ST12 can only be bent and formed, and no stamping is allowed.
316L stainless steel is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches.
DC01 Galvanized steel sheet is used for automobiles, sanitary ware, food machinery, pressure vessels, nuclear power, chemical equipment, elevators, rail transit, machinery manufacturing, structural piping, and architectural decoration.
316L Stainless steel round bar
Stainless steel round bar is a common type of steel, which is widely used in industrial production, machining, construction and other fields.
Hastelloy C-276 alloy is one of the few materials that can be used in hot concentrated sulfuric acid solution It is mainly resistant to wet chlorine, various oxidizing chlorides, chloride solutions, sulfuric acid and oxidizing salts, and has good corrosion resistance at low and medium temperatures. Therefore, in the past 30 years, it has been widely used in harsh corrosive environments, such as chemical industry, petrochemical industry, flue gas desulfurization, pulp and paper making, environmental protection and other industrial fields.
1. Width: 600-1000 mm 2. Thickness: 0.135-2.0 mm 3. Hardness: T2, T2.5, T3, T4, T5, T6, T7, DR8, DR9 4. Standard: AISI, ASTM, BS, DIN, GB, JIS 5. Grade: SGCC, SGCH, SGCE, SPCG, DX51D, 6. Technique: cold rolled 7. Coil weight: about 5--12 tons 8. Coil diameter: 508-1500 mm or as per customer's request
The better weldability also makes 4130 Carbon Steel Pipe a popular choice in the aerospace industry, which is used to manufacture commercial and military aircraft components requiring high strength and low weight. Examples include gears, piston pins, etc. Other uses of 4130 steel include auto parts, cutting tools and drilling machines.
A214 carbon steel pipe: resistance welded carbon steel pipe for heat exchanger and condenser.
The tensile strength of ST42 Carbon Steel Pipe shall not be less than 42kgf/mm2, which is 420MPa.ST42 Carbon Steel Pipe is a German standard seamless steel pipe, which is widely used. German standard seamless steel pipes for general purposes are rolled from ordinary carbon structural steel, low alloy structural steel or alloy structural steel, with the largest output, and are mainly used as pipes or structural parts for fluid transportation .
Application: It is suitable for stress and pressure parts, as well as steam, water, gas and air pipelines for general purposes. A53 pipeline pipe belongs to American petroleum standard pipeline pipe. Pipeline pipe is used to transport oil, steam and water pumped out of the ground to oil and natural gas industrial enterprises through pipeline pipe. Pipeline pipe includes seamless pipe and welded steel pipe, with flat end, threaded end and socket end at the pipe end; The connection methods are end welding, coupling connection, socket connection, etc.
Nickel alloy 201 bar is made of a face-centered cubic structure solid solution alloy composed of trace elements such as manganese and copper and mainly nickel. It is a commercially pure forged nickel with 99.6% nickel. The carbon content is lower than Nickel 200 with less than 0.02%.
Nickel Alloy 200 bar is made of a pure nickel alloy having a chemical composition containing a minimum of 99% nickel. This alloy is the purest nickel alloy and is often chosen for use inly corrosive environments.
Monel K-500 bar is made of a high-performance nickel-copper alloy with excellent corrosion resistance and high-temperature strength. It is widely used in marine engineering, petrochemical industry, aerospace and other fields.
Monel R405 bar is made of an alloy with high strength and good corrosion resistance, as a chromium-cobalt superalloy. It is widely used in aerospace, petrochemical, marine engineering and other fields due to its excellent properties.
Monel 400, also known as UNS N04400 or German grade 2.4360, is a high-performance alloy whose chemical composition and excellent mechanical properties enable it to perform well in various harsh environments. Whether in the marine engineering or chemical industries, Monel 400 bar plays an indispensable role, providing reliable protection and support for various equipment and components.
Incoloy 925 bar is made of a nickel-based high-temperature alloy that is widely used in industrial fields under various environments resulting from its excellent corrosion resistance and high-temperature strength.
Incoloy 825 bar is made of a nickel-based alloy showing excellent corrosion resistance and good processability. The outstanding properties of Incoloy 825 alloy make it widely used in the fields of petroleum, chemical industry, pharmaceutical, food and marine engineering.
Incoloy 800H bar is made of an austenitic heat-resistant alloy used in high-temperature environments. It is widely favored for its excellent high-temperature strength, oxidation resistance and corrosion resistance. Incoloy 800H is widely used in equipment manufacturing in various high-temperature environments, such as aerospace, petrochemical, energy and other fields.
Incoloy 800 bar is made of a nickel-chromium-iron alloy of remarkable corrosion resistance and high-temperature strength. This alloy features good oxidation resistance in high-temperature environments and good toughness in low-temperature environments. Therefore, it is commonly seen in various industrial fields, including chemical processing, oil and gas, power and automobile manufacturing, etc.
Inconel 718 bar is made of a special type of high-strength superalloy whose nickel-chromium base makes it resistant to corrosion, high pressures and temperatures up to 700°C. Due to its unique properties, Inconel 718 bar is used in a wide range of applications from manufacturing operations to military equipment and the aerospace industry.
Inconel 625 bar is made of a nickel-based high-temperature alloy composed of nickel, chromium, molybdenum, niobium and other elements. It has outstanding high temperature resistance, strength and good oxidation resistance, and is widely used in aerospace, energy, chemical industry and other fields.
Inconel 601 bar is made of a high-strength, corrosion-resistant nickel-based alloy that is widely used in various high-temperature equipment. As a material with good mechanical properties and corrosion resistance, Inconel 601 is widely used in aviation, chemical industry, marine engineering and other fields.
Inconel 600 bar is made of a nickel-based superalloy known for its excellent heat resistance, corrosion resistance and high strength in environments. This bar is widely used in the chemical, aerospace, heat treatment and power industries, especially in high-temperature applications that require resistance to oxidizing and reducing environments.
Hastelloy X bar is made of a high-quality alloy material of excellent corrosion resistance, high temperature strength and processing properties. It is widely used in petroleum, chemical industry, pharmaceuticals, aerospace and other fields.
Hastelloy B3 bar has better strength and corrosion resistance at high temperatures compared with traditional Hastelloy. B3 alloy shows excellent stability and durability, especially in oxidizing and reducing environments, as well as corrosive environments such as strong acid and strong alkali.
Hastelloy B2 bar is made of a solid solution strengthened nickel-based special alloy featuring excellent corrosion resistance and high temperature strength. Hastelloy B2 material exhibits excellent corrosion resistance in various temperatures and complex environments, especially in oxidizing environments.
ENQUIRE NOW
If you are interested in our products and services, please contact us or leave us a message, we will serve you wholeheartedly
Copyright ©
